Elementalia

Elementalia, corvus 10k competition entry. The inverted coaster's station still needs to be placed. Follow these steps to correctly place the station: 1. Select 4m piece at the end of the coaster, after the brakes. Place the station there, entrance and exit on the left side. 2. Remove the 4m piece and remove 2 pieces from the back of the station. The station should now be same length as the other coaster. 3. Select the brakes and place a 8m dual direction launch piece, set boost target speed to 45 m/s and acceleration rate to 9 m/s. 4. Place a 4m piece of standard track, the track should now be connected. 5. Select station and set following values: boost target speed 45, acceleration rate 1, brake target speed 27, deceleration rate 0. The coaster should now work as intended